Automotive (AUT) at Germanna Community College


         
 
Advanced Search
Distance Learning
Restrict search to:
   Distance Learning Types
Time of Day
Restrict search to:
Term
Restrict search to:
AUT 100 - Introduction to Automotive Shop Practices
Introduces shop practices for automotive laboratory and shop safety, identification and use of hand tools, general power equipment and maintenance of automotive shop. Explains basic operation procedures of standard shop equipment. Presents Occupational Safety and Health Act standards pertaining to the automotive field.
Lecture 2-3 hours per week.
2-3 credits
AUT 111 - Automotive Engines I
Presents analysis of power, cylinder condition, valves and bearings in the automotive engine to establish the present condition, repairs or adjustments. Part I of II.
Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-6 hours per week.
3-4 credits
AUT 112 - Automotive Engines II
Presents analysis of power, cylinder condition, valves and bearings in the automotive engine to establish the present condition, repairs or adjustments. Part II of II.
Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-6 hours per week.
3-4 credits
AUT 121 - Automotive Fuel Systems I
Analyses major domestic and foreign automotive fuel systems to include carburetors and fuel injection systems. Includes detailed inspection and discussion of fuel tanks, connecting lines, instruments, filters, fuel pumps, superchargers, and turbo charger. Also includes complete diagnosis, troubleshooting, overhaul and factory adjustment procedures of all major carbureted and fuel injection systems. Part I of II.
Lecture 3 hours. Laboratory 0-3 hours. Total 3-6 hours per week.
3-4 credits
AUT 122 - Automotive Fuel Systems II
Analyses major domestic and foreign automotive fuel systems to include carburetors and fuel injection systems. Includes detailed inspection and discussion of fuel tanks, connecting lines, instruments, filters, fuel pumps, superchargers, and turbo charger. Also includes complete diagnosis, troubleshooting, overhaul and factory adjustment procedures of all major carbureted and fuel injection systems. Part II of II.
Lecture 3 hours. Laboratory 0-3 hours. Total 3-6 hours per week.
3-4 credits
AUT 126 - Auto Fuel and Ignition Systems
Studies automobile ignition and fuel systems, their functions in operation of engine. Includes carburetors, fuel pumps, ignition systems, troubleshooting, engine test and adjustment, tune-up.
Lecture 2-4 hours. Laboratory 3-9 hours. Total 7-11 hours per week.
5 credits
AUT 136 - Automotive Vehicle Inspection
Presents information on methods for performing automotive vehicle safety inspection.
Lecture 1 hour. Laboratory 2 hours. Total 3 hours per week.
2 credits
AUT 141 - Auto Power Trains I
Presents operation, design, construction and repair of power train components, standard and automatic transmission. Includes clutches, propeller shaft, universal joints, rear axle assemblies, fluid couplings, torque converters as well as 2, 3, and 4 speed standard, overdrive and automatic transmissions. Part I of II.
Lecture 2-3 hours. Laboratory 2-6 hours. Total 4-8 hours per week.
3-4 credits
AUT 197 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
AUT 199 - Supervised Study
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
AUT 215 - Emissions Systems Diagnosis and Repair
Presents logical diagnostic paths to identify vehicle HC-CO, O2, and NOx failure areas, Teaches a progression of failure detection from most likely to more complex causes. Emphasizes use of infrared analyzer and manufacturer's specified adjustments.
Lecture 2 hours per week.
2 credits
AUT 217 - Computerized Fuel Systems
Introduces devices which sense the engine condition and control fuel mixture to produce economical fuel consumption. Teaches theory of operation, testing, adjustment and repair or replacement of these devices.
Lecture 1-2 hours. Laboratory 3-6 hours. Total 5-7 hours per week.
3 credits
AUT 236 - Automotive Climate Control
Introduces principles of refrigeration, air conditioning controls, and adjustment and general servicing of automotive air conditioning systems.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
AUT 237 - Automotive Accessories
Introduces the principles, design, construction, adjustment, and maintenance of all automotive equipment classed as an accessory which is not studied in other automotive courses.
Lecture 1-3 hours. Laboratory 0-3 hours. Total 2-5 hours per week.
2-3 credits
AUT 241 - Automotive Electricity I
Introduces electricity and magnetism, symbols and circuitry as applied to the alternators, regulators, starters, lighting systems, instruments and gauges and accessories. Part I of II.
Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-6 hours per week.
3-4 credits
AUT 245 - Automotive Electronics
Introduces field of electronics as it applies to the modern automobile. Emphasizes basic circuit operation, diagnosis and repair of digital indicator and warning systems.
Lecture 3 hours. Laboratory 0-3 hours. Total 3-6 hours per week.
3-4 credits
AUT 251 - Automatic Transmissions
Studies several types of automatic transmissions, torque converters, and their principles of operation. Includes adjustment, maintenance, and rebuilding.
Lecture 2-3 hours. Laboratory 2-6 hours. Total 4-8 hours per week.
3-4 credits
AUT 252 - Automotive Drivetrains
Presents the operation, design, diagnosis, and repair of manual, automatic transmissions, and final drive systems, for both front and rear drive vehicles. Covers clutches, synchronizers, torque converters, differentials, drive axles, U-joints, CV joints, 4-wheel drive, and all-wheel drive systems.
Lecture 2 hours. Laboratory 6 hours. Total 8 hours per week.
5 credits
AUT 252 Detailed Outline (VCCS Faculty & Staff Only) icon
AUT 255 - Advanced Automotive Engine Performance Diagnostics
Introduces advanced engine performance concepts, including theory and practical application. Covers vehicle communications, scan-tool diagnostics, advanced engine mechanical tests, and diagnosing and repairing complex vehicle drivability issues. Provides preparation for the Automotive Service Excellence (ASE) A8 Engine Performance Certification examination.
Lecture 2 hours. Laboratory 6 hours. Total 8 hours per week.
Prerequisite: AUT 155.
5 credits
AUT 255 Detailed Outline (VCCS Faculty & Staff Only) icon
AUT 265 - Automotive Braking Systems
Presents operation, design, construction, repair, and servicing of braking system, including Anti-Lock Brake Systems (ABS). Explains uses of tools and test equipment, evaluation of test results, estimation of repair cost for power, standard and disc brakes.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
AUT 266 - Auto Alignment, Suspension and Steering
Introduces use of alignment equipment in diagnosing, adjusting, and repairing front and rear suspensions. Deals with repair and servicing of power and standard steering systems.
Lecture 1-2 hours. Laboratory 6 hours. Total 7-8 hours per week.
3-4 credits
AUT 267 - Automotive Suspension and Braking Systems
Presents the operation, design, construction, repair and servicing of braking and suspension systems. Explains use of tools and test equipment, evaluation of test results, estimation and repair cost, front and rear suspension alignment, power and standard steering, and power, standard and disc brakes.
Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-6 hours per week.
3-4 credits
AUT 275 - Shop Management
Studies shop layout, personnel management, cost analysis, record keeping and quality control. Discusses shop manager, service salesman, and service writer's roles in customer relations.
Lecture 2-3 hours per week.
2-3 credits
AUT 290 - Coordinated Internship
Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.
Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
AUT 298 - Seminar and Project
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits