Engineering (EGR) at Virginia Western Community College
Distance Learning
Time of Day
Term
- EGR 100 - Engineering Technology Orientation
- Focuses on the roles and responsibilities of the engineering team, professional ethics, problem solving with hand calculator and computer applications.Laboratory 2 hours per week.
1 credits - EGR 120 - Introduction to Engineering
- Introduces the engineering profession, professional concepts, ethics, and responsibility. Reviews hand calculators, number systems, and unit conversions. Introduces the personal computer and operating systems. Includes engineering problem solving techniques using computer software. This course applies to career/technical education (CTE) programs. EGR 121-122 serve both transfer and CTE programs.Lecture 0-2 hours. Laboratory 0-3 hours. Total 1-4 hours per week.
1-2 credits - EGR 121 - Foundations of Engineering
- Introduces the engineering profession and its impact on society and the environment, including engineering problem solving, the engineering design process, and professional practices. Covers fundamental engineering calculations, descriptive statistics, basic spreadsheet and mathematical scripting language applications, professional ethics, teamwork, and communicationLecture 2 hours. Total 2 hour per week.
Prerequisites: ENG 111 eligible; MTH 162 or MTH 167, or equivalent; or departmental approval.2 credits - EGR 122 - Engineering Design
- Applies engineering methods to a semester-long team design project with an emphasis on engineering software involving 2D and 3D computer aided design; data modeling and analysis; and iterative programming solutions. Covers design drawings and dimensioning; spreadsheet software usage; mathematical scripting language; and professional practices.Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
Prerequisite: EGR 121 or departmental permission.3 credits - EGR 125 - Introduction to Computer Programming for Engineers
- Introduces problem solving and implementation of computer software solutions using a high-level programming language in a structured environment. Includes concepts and practice of algorithm design, language syntax, control structures, arrays, and introduction to object-oriented programming. Covers engineering applications, such as mathematical modeling, file input and output, and basic numerical methods. The assignments in this course require mathematical problem-solving skills, algebraic modeling, and functions, and use of variables.Lecture 4 hours. Total 4 hours per week.
Prerequisites: MTH 162 or MTH 167 or equivalent; Corequisites: EGR 1214 credits - EGR 126 - Computer Programming for Engineers
- Introduces computers, their architecture and software. Teaches program development using flowcharts. Solves engineering problems involving programming in languages such as FORTRAN, PASCAL, or C++.Lecture 2-3 hours. Laboratory 1-2 hours. Total 3-4 hours per week.
3 credits - EGR 127 - Introduction to Computer Programming
- Introduces programming in a higher level language such as FORTRAN, BASIC or PASCAL, or C++ on the microcomputer. Uses the operating system, packaged software and peripheral devices. Emphasizes engineering program problem solving.Lecture 1-2 hours. Laboratory 1-2 hours. Total 2-4 hours per week.
2-3 credits - EGR 130 - Statics and Strength of Materials for Engineering Techn
- Presents principles and applications of free-body diagrams of force systems in equilibrium. Analyzes frames and trusses. Presents principles and applications to problems in friction, centroids and moments of inertia. Includes properties of materials, stress, strain, elasticity, design of connections, shear and bending in statically determinate beams, and axially loaded columns.Lecture 3-4 hours. Laboratory 1-4 hours. Total 4-7 hours per week.
4-5 credits - EGR 135 - Statics for Engineering Technology
- Introduces Newton's Laws, resultants and equilibrium of force systems, analysis of trusses and frames. Teaches determination of centroids, distributed loads and moments of inertia. Covers dry friction and force systems in space.Lecture 3 hours per week.
3 credits - EGR 136 - Strength of Materials for Engineering Technology
- Presents concepts of stress and strain. Focuses on analysis of stresses and deformations in loaded members, connectors, shafts, beams, columns and combined stress.Lecture 3 hours per week.
3 credits - EGR 140 - Engineering Mechanics - Statics
- Introduces mechanics of vector forces and space, scalar mass and time, including S.I. and U.S. customary units. Teaches equilibrium, free-body diagrams, moments, couples, distributed forces, centroids, moments of inertia analysis of two- force and multi-force members and friction and internal forces.Lecture 3 hours per week.
3 credits - EGR 190 - Coordinated Internship
- Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - EGR 195 - Topics In
- Provides an opportunity to explore topical areas of interest to or needed by students.May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits - EGR 198 - Seminar and Project
- Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.May be repeated for credit. Variable hours.
1-5 credits - EGR 199 - Supervised Study
- Assigns problems for independent study incorporating previous instruction and supervised by the instructor.May be repeated for credit. Variable hours.
1-5 credits - EGR 206 - Engineering Economics
- Presents economic analysis of engineering alternatives. Studies economic and cost concepts, calculation of economic equivalence, comparison of alternatives, replacement economy, economic optimization in design and operation, depreciation, and after tax analysis.Lecture 2-3 hours per week.
2-3 credits - EGR 216 - Computer Methods in Engineering and Technology
- Provides advanced level experience in using a computer as a tool for solving technical problems and performing office functions. Includes computer hardware and operating system usage, structured programming in a selected high level language, use of word processing software, computer graphics and spreadsheets. Focuses on the analysis and solution of problems in engineering and technology.Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
3 credits - EGR 240 - Statics
- Introduces basic concepts of engineering mechanics, systems of forces and couples, equilibrium of particles and rigid bodies, and internal forces and analysis of structures, including SI and U.S. customary units. Includes trusses, frames, machines, beams, distributed forces, friction, and centroids.Lecture 3 hours. Total 3 hours per week.
Prerequisites: MTH 263 or department permission3 credits - EGR 245 - Dynamics
- Presents approach to kinematics and kinetics of particles (and systems of particles) in linear and curvilinear motion. Includes kinematics and kinetics of rigid bodies in plane motion. Teaches Newton's second law, work-energy, and impulse-momentum methods.Lecture 3 hours. Total 3 hours per week.
Prerequisites: EGR 240 or departmental approval.3 credits - EGR 246 - Mechanics of Materials
- Introduces concepts of stress, strain, deformation, internal equilibrium, and basic properties of engineering materials. Analyzes axial loads, torsion, bending, shear and combined loading. Studies stress transformation, principal stresses, and buckling.Lecture 3 hours. Total 3 hours per week.
Prerequisites: EGR 240 or departmental approval.3 credits - EGR 247 - Mechanics of Materials Laboratory
- Examines mechanical behavior of bars, rods, shafts, tubes and beams subjected to various types of loading. Introduces experimental stress analysis techniques, such as the use of strain gages and data reduction.Laboratory 2 hours per week.
1 credits - EGR 251 - Basic Electric Circuits I
- Teaches fundamentals of electric circuits. Includes circuit quantities of charge, current, potential, power and energy. Teaches resistive circuit analysis; Ohm's and Kirchoff's laws; nodal and mesh analysis; network theorems; RC, RL and RLC circuit transient response with constant forcing functions. Teaches AC steady-state analysis, power, three- phase circuits. Presents frequency domain analysis, resonance, Fourier series, inductively coupled circuits, Laplace transform applications, and circuit transfer functions. Introduces problem solving using computers. Part I of II.Lecture 3 hours per week.
3 credits - EGR 252 - Basic Electric Circuits II
- Teaches fundamentals of electric circuits. Includes circuit quantities of charge, current, potential, power and energy. Teaches resistive circuit analysis; Ohm's and Kirchoff's laws; nodal and mesh analysis; network theorems; RC, RL and RLC circuit transient response with constant forcing functions. Teaches AC steady-state analysis, power, three- phase circuits. Presents frequency domain analysis, resonance, Fourier series, inductively coupled circuits, Laplace transform applications, and circuit transfer functions. Introduces problem solving using computers. Part II of II.Lecture 3 hours per week.
3 credits - EGR 255 - Electric Circuits Laboratory
- Teaches principles and operation of laboratory instruments such as VOM, electronic voltmeters, digital multimeters, oscilloscopes, counters, wave generators and power supplies. Presents application to circuit measurements, including transient and steady-state response of simple networks with laboratory applications of laws and theories of circuits plus measurement of AC quantities.Laboratory 3 hours per week.
1 credits - EGR 261 - Signals and Systems
- Covers topics including Laplace transforms and Laplace transform analysis of circuits, time and frequency domain representation of linear systems, methods of linear systems analysis including convolution and Laplace transforms, frequency domain representation of signals including frequency response, filters, Fourier series, and Fourier transforms.Lecture 3 hours per week.
Prerequisites: may be applied locally.3 credits - EGR 265 - Digital Electronics and Logic Design
- Teaches number representation in digital systems; Boolean algebra; design of digital circuits, including gates, flip- flops, counters, registers, architecture, microprocessors, input-output devices.Lecture 3 hours. Laboratory 2 hours. Total 5 hours per week.
4 credits - EGR 270 - Fundamentals of Computer Engineering
- Covers digital system analysis, design, and implementation. Includes digital logic, Boolean algebra, combinational and sequential circuits, hierarchical design, and introduction to computer organization and assembly language. Features in laboratory work the use of discrete logic, programmable logic devices, and hardware description language to design, simulate, implement, validate, and document digital circuitsLecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
Prerequisites: EGR 121 and either EGR 125 or CSC 2214 credits - EGR 271 - Electric Circuits I
- Covers fundamentals of electric circuits. Teaches resistive circuit analysis methods, including network theorems. Features operational amplifiers, capacitors, inductors, resistor-capacitor (RC), resistor-inductor (RL) and resistance-inductance-capacitance (RLC) circuit transient response. Introduces phasor representation of alternating current (AC) circuits. Utilizes circuit design processes, technical writing and computer software for problem solving. Includes laboratory analysis to explore course concepts. Part I of II.4 credits
- EGR 272 - Electric Circuits II
- Covers sinusoidal steady-state circuit response using phasors, frequency analysis of linear circuits including frequency response, Bode plots, Fourier series analysis, and design of basic filters. Examines Laplace circuit analysis and transfer functions, AC power analysis, nonlinear diode models, and technical writing. Includes laboratory analysis and open-ended design project. Part II of II.4 credits
- EGR 277 - Digital Logic
- Presents an introduction to digital logic, including such topics as number systems, Boolean Algebra, minimization techniques, implementation of digital functions, sequential machines, state diagrams, state tables, and programmable logic devices.Lecture 3 hours per week.
3 credits - EGR 280 - Foundations of Environmental Engineering
- Provides an introduction to the concepts of environmental engineering including air pollution, water pollution, water treatment, waste management, and health risk assessment. Examines sustainability and global climate change in the context of contemporary environmental engineering.Lecture 3 hours. Total 3 hours per week.
Prerequisite: CHM 1113 credits - EGR 282 - Hydraulics for Civil and Environmental Engineering
- Introduces the basic principles governing the statics and dynamics of fluids, especially incompressible fluids. Examines hydrostatic pressure; continuity, Bernoulli, and momentum equations; viscosity flow problems; measuring instruments; and applications to closed conduits and open channels.Lecture 3 hours. Total 3 hours per week.
Prerequisite: EGR 240 or departmental approval3 credits - EGR 285 - Capstone Project
- Provides a capstone research project for the final semester of the program, focusing inquiry upon an area of interest to the student or area relevant to their prospective career field. May include problem based research topics, internships, or other focused projects.Lecture 1 hour per week.
Prerequisite: IND 290.1 credits - EGR 295 - Topics In
- Provides an opportunity to explore topical areas of interest to or needed by students.May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits - EGR 299 - Supervised Study
- Assigns problems for independent study incorporating previous instruction and supervised by the instructor.May be repeated for credit. Variable hours.
1-5 credits