Engineering (EGR)


 
Advanced Search
Distance Learning
Restrict search to:
   Distance Learning Types
Time of Day
Restrict search to:
Term
Restrict search to:
EGR 90 - Coordinated Internship
Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.
Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 93 - Studies In
Covers new content not covered in existing courses in the discipline. Allows instructor to explore content and instructional methods to assess the course's viability as a permanent offering.
Variable hours per week.
1-5 credits
EGR 95 - Topics In
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
EGR 96 - On-Site Training
Specializes in career orientation and training program without pay in selected businesses and industry, supervised and coordinated by the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 97 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 98 - Seminar and Project
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
EGR 99 - Supervised Study
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
EGR 100 - Engineering Technology Orientation
Focuses on the roles and responsibilities of the engineering team, professional ethics, problem solving with hand calculator and computer applications.
Laboratory 2 hours per week.
1 credits
EGR 120 - Introduction to Engineering
Introduces the engineering profession, professional concepts, ethics, and responsibility. Reviews hand calculators, number systems, and unit conversions. Introduces the personal computer and operating systems. Includes engineering problem solving techniques using computer software. This course applies to career/technical education (CTE) programs. EGR 121-122 serve both transfer and CTE programs.
Lecture 0-2 hours. Laboratory 0-3 hours. Total 1-4 hours per week.
1-2 credits
EGR 121 - Foundations of Engineering
Introduces the engineering profession and its impact on society and the environment, including engineering problem solving, the engineering design process, and professional practices. Covers fundamental engineering calculations, descriptive statistics, basic spreadsheet and mathematical scripting language applications, professional ethics, teamwork, and communication
Lecture 2 hours. Total 2 hour per week.
Prerequisites: ENG 111 eligible; MTH 162 or MTH 167, or equivalent; or departmental approval.
2 credits
EGR 121 Detailed Outline icon
EGR 122 - Engineering Design
Applies engineering methods to a semester-long team design project with an emphasis on engineering software involving 2D and 3D computer aided design; data modeling and analysis; and iterative programming solutions. Covers design drawings and dimensioning; spreadsheet software usage; mathematical scripting language; and professional practices.
Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
Prerequisite: EGR 121 or departmental permission.
3 credits
EGR 122 Detailed Outline icon
EGR 125 - Introduction to Computer Programming for Engineers
Introduces problem solving and implementation of computer software solutions using a high-level programming language in a structured environment. Includes concepts and practice of algorithm design, language syntax, control structures, arrays, and introduction to object-oriented programming. Covers engineering applications, such as mathematical modeling, file input and output, and basic numerical methods. The assignments in this course require mathematical problem-solving skills, algebraic modeling, and functions, and use of variables.
Lecture 4 hours. Total 4 hours per week.
Prerequisites: MTH 162 or MTH 167 or equivalent; Corequisites: EGR 121
4 credits
EGR 125 Detailed Outline icon
EGR 126 - Computer Programming for Engineers
Introduces computers, their architecture and software. Teaches program development using flowcharts. Solves engineering problems involving programming in languages such as FORTRAN, PASCAL, or C++.
Lecture 2-3 hours. Laboratory 1-2 hours. Total 3-4 hours per week.
3 credits
EGR 127 - Introduction to Computer Programming
Introduces programming in a higher level language such as FORTRAN, BASIC or PASCAL, or C++ on the microcomputer. Uses the operating system, packaged software and peripheral devices. Emphasizes engineering program problem solving.
Lecture 1-2 hours. Laboratory 1-2 hours. Total 2-4 hours per week.
2-3 credits
EGR 130 - Statics and Strength of Materials for Engineering Techn
Presents principles and applications of free-body diagrams of force systems in equilibrium. Analyzes frames and trusses. Presents principles and applications to problems in friction, centroids and moments of inertia. Includes properties of materials, stress, strain, elasticity, design of connections, shear and bending in statically determinate beams, and axially loaded columns.
Lecture 3-4 hours. Laboratory 1-4 hours. Total 4-7 hours per week.
4-5 credits
EGR 135 - Statics for Engineering Technology
Introduces Newton's Laws, resultants and equilibrium of force systems, analysis of trusses and frames. Teaches determination of centroids, distributed loads and moments of inertia. Covers dry friction and force systems in space.
Lecture 3 hours per week.
3 credits
EGR 136 - Strength of Materials for Engineering Technology
Presents concepts of stress and strain. Focuses on analysis of stresses and deformations in loaded members, connectors, shafts, beams, columns and combined stress.
Lecture 3 hours per week.
3 credits
EGR 140 - Engineering Mechanics - Statics
Introduces mechanics of vector forces and space, scalar mass and time, including S.I. and U.S. customary units. Teaches equilibrium, free-body diagrams, moments, couples, distributed forces, centroids, moments of inertia analysis of two- force and multi-force members and friction and internal forces.
Lecture 3 hours per week.
3 credits
EGR 190 - Coordinated Internship
Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.
Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 193 - Studies In
Covers new content not covered in existing courses in the discipline. Allows instructor to explore content and instructional methods to assess the course's viability as a permanent offering.
Variable hours per week.
1-5 credits
EGR 195 - Topics In
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
EGR 196 - On-Site Training
Specializes in career orientation and training program without pay in selected businesses and industry, supervised and coordinated by the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 197 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 198 - Seminar and Project
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
EGR 199 - Supervised Study
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
EGR 206 - Engineering Economics
Presents economic analysis of engineering alternatives. Studies economic and cost concepts, calculation of economic equivalence, comparison of alternatives, replacement economy, economic optimization in design and operation, depreciation, and after tax analysis.
Lecture 2-3 hours per week.
2-3 credits
EGR 216 - Computer Methods in Engineering and Technology
Provides advanced level experience in using a computer as a tool for solving technical problems and performing office functions. Includes computer hardware and operating system usage, structured programming in a selected high level language, use of word processing software, computer graphics and spreadsheets. Focuses on the analysis and solution of problems in engineering and technology.
Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
3 credits
EGR 231 - Mass and Energy Balances
Introduces the field of chemical engineering and how material and energy balances are applied to chemical processes, and physical and thermodynamic properties of multi-component systems.
Lecture 3 hours. Total 3 hours per week.
Prerequisites: MTH 264, EGR 121, CHM 112 (grade of C or higher in these courses)
3 credits
EGR 231 Detailed Outline icon
EGR 232 - Chemical Engineering Thermodynamics
Introduces the first and second laws of thermodynamics. Examines energy conservation; concepts of equilibrium, temperature, energy, and entropy; partial molar properties; pure component and mixture equations of state; processes involving energy transfer as work and heat; reversibility and irreversibility; and closed and open systems and cyclic processes.
Lecture 3 hours. Total 3 hour per week.
Prerequisites: MTH 265 and EGR 231 (grade of C or higher in both of these courses)
3 credits
EGR 232 Detailed Outline icon
EGR 240 - Statics
Introduces basic concepts of engineering mechanics, systems of forces and couples, equilibrium of particles and rigid bodies, and internal forces and analysis of structures, including SI and U.S. customary units. Includes trusses, frames, machines, beams, distributed forces, friction, and centroids.
Lecture 3 hours. Total 3 hours per week.
Prerequisites: MTH 263 or department permission
3 credits
EGR 240 Detailed Outline icon
EGR 245 - Dynamics
Presents approach to kinematics and kinetics of particles (and systems of particles) in linear and curvilinear motion. Includes kinematics and kinetics of rigid bodies in plane motion. Teaches Newton's second law, work-energy, and impulse-momentum methods.
Lecture 3 hours. Total 3 hours per week.
Prerequisites: EGR 240 or departmental approval.
3 credits
EGR 245 Detailed Outline icon
EGR 246 - Mechanics of Materials
Introduces concepts of stress, strain, deformation, internal equilibrium, and basic properties of engineering materials. Analyzes axial loads, torsion, bending, shear and combined loading. Studies stress transformation, principal stresses, and buckling.
Lecture 3 hours. Total 3 hours per week.
Prerequisites: EGR 240 or departmental approval.
3 credits
EGR 246 Detailed Outline icon
EGR 247 - Mechanics of Materials Laboratory
Examines mechanical behavior of bars, rods, shafts, tubes and beams subjected to various types of loading. Introduces experimental stress analysis techniques, such as the use of strain gages and data reduction.
Laboratory 2 hours per week.
1 credits
EGR 248 - Thermodynamics for Engineering
Presents fundamental concepts of classical thermodynamics. Includes the first and second law of thermodynamics, thermodynamic properties of pure substances, processes involving energy transfer as work and heat, reversibility and irreversibility, closed and open systems, and thermodynamic cycles.
Lecture 3 hours. Total 3 hours per week.
Prerequisites: CHM 111 and MTH 264 or department approval.
3 credits
EGR 248 Detailed Outline icon
EGR 251 - Basic Electric Circuits I
Teaches fundamentals of electric circuits. Includes circuit quantities of charge, current, potential, power and energy. Teaches resistive circuit analysis; Ohm's and Kirchoff's laws; nodal and mesh analysis; network theorems; RC, RL and RLC circuit transient response with constant forcing functions. Teaches AC steady-state analysis, power, three- phase circuits. Presents frequency domain analysis, resonance, Fourier series, inductively coupled circuits, Laplace transform applications, and circuit transfer functions. Introduces problem solving using computers. Part I of II.
Lecture 3 hours per week.
3 credits
EGR 252 - Basic Electric Circuits II
Teaches fundamentals of electric circuits. Includes circuit quantities of charge, current, potential, power and energy. Teaches resistive circuit analysis; Ohm's and Kirchoff's laws; nodal and mesh analysis; network theorems; RC, RL and RLC circuit transient response with constant forcing functions. Teaches AC steady-state analysis, power, three- phase circuits. Presents frequency domain analysis, resonance, Fourier series, inductively coupled circuits, Laplace transform applications, and circuit transfer functions. Introduces problem solving using computers. Part II of II.
Lecture 3 hours per week.
3 credits
EGR 255 - Electric Circuits Laboratory
Teaches principles and operation of laboratory instruments such as VOM, electronic voltmeters, digital multimeters, oscilloscopes, counters, wave generators and power supplies. Presents application to circuit measurements, including transient and steady-state response of simple networks with laboratory applications of laws and theories of circuits plus measurement of AC quantities.
Laboratory 3 hours per week.
1 credits
EGR 260 - Circuit Analysis
Covers topics in linear circuit analysis, including basic electrical properties, resistive circuits, network equations, operational amplifiers, network reduction techniques, network theorems, two-port parameters and networks, inductors, capacitors, first-order circuits, second-order circuits and phasor analysis.
Lecture 3 hours per week.
Prerequisites: may be applied locally.
3 credits
EGR 261 - Signals and Systems
Covers topics including Laplace transforms and Laplace transform analysis of circuits, time and frequency domain representation of linear systems, methods of linear systems analysis including convolution and Laplace transforms, frequency domain representation of signals including frequency response, filters, Fourier series, and Fourier transforms.
Lecture 3 hours per week.
Prerequisites: may be applied locally.
3 credits
EGR 262 - Fundamental Circuits Laboratory
Covers topics including microprocessor hardware and programming, lab test equipment, lab safety, technical report writing, and using a microprocessor, such as the MicroStamp 11, to control basic electric circuits. Experiments include topics such as resistive circuits, analog-to-digital and digital-to-analog conversion, pulse width modulation, and the design of power supplies.
Lecture 1 hour. Laboratory 2 hours. Total 3 hours per week.
Co-requisite: EGR 261.
2 credits
EGR 263 - Signals and Systems Laboratory
Applies analysis techniques for signals and systems using software modeling and circuit analysis, comparing measurements to time- and frequency-domain analytic results; Fourier and Laplace transforms; systems properties such as linearity, time invariance and stability; convolution, transfer functions and frequency response to determine system response.
Laboratory 3 hours. Total 3 hours per week.
Prerequisites: EGR 251, MTH 279; Corequisite: EGR 261.
1 credits
EGR 263 Detailed Outline (VCCS Faculty & Staff Only) icon
EGR 265 - Digital Electronics and Logic Design
Teaches number representation in digital systems; Boolean algebra; design of digital circuits, including gates, flip- flops, counters, registers, architecture, microprocessors, input-output devices.
Lecture 3 hours. Laboratory 2 hours. Total 5 hours per week.
4 credits
EGR 270 - Fundamentals of Computer Engineering
Covers digital system analysis, design, and implementation. Includes digital logic, Boolean algebra, combinational and sequential circuits, hierarchical design, and introduction to computer organization and assembly language. Features in laboratory work the use of discrete logic, programmable logic devices, and hardware description language to design, simulate, implement, validate, and document digital circuits
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
Prerequisites: EGR 121 and either EGR 125 or CSC 221
4 credits
EGR 270 Detailed Outline icon
EGR 271 - Electric Circuits I
Covers fundamentals of electric circuits. Teaches resistive circuit analysis methods, including network theorems. Features operational amplifiers, capacitors, inductors, resistor-capacitor (RC), resistor-inductor (RL) and resistance-inductance-capacitance (RLC) circuit transient response. Introduces phasor representation of alternating current (AC) circuits. Utilizes circuit design processes, technical writing and computer software for problem solving. Includes laboratory analysis to explore course concepts. Part I of II.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
Prerequisites: MTH 264 and EGR 121
4 credits
EGR 271 Detailed Outline icon
EGR 272 - Electric Circuits II
Covers sinusoidal steady-state circuit response using phasors, frequency analysis of linear circuits including frequency response, Bode plots, Fourier series analysis, and design of basic filters. Examines Laplace circuit analysis and transfer functions, AC power analysis, nonlinear diode models, and technical writing. Includes laboratory analysis and open-ended design project. Part II of II.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
Prerequisites: MTH 267 and EGR 271
4 credits
EGR 272 Detailed Outline icon
EGR 277 - Digital Logic
Presents an introduction to digital logic, including such topics as number systems, Boolean Algebra, minimization techniques, implementation of digital functions, sequential machines, state diagrams, state tables, and programmable logic devices.
Lecture 3 hours per week.
3 credits
EGR 278 - Digital Logic Laboratory
Constructs digital logic circuits to verify analysis and design methods. Covers logic gates, combinational and sequential logic circuits, programmable logic devices, measurement techniques, and report writing.
Laboratory 2-4 hours per week.
1-2 credits
EGR 280 - Foundations of Environmental Engineering
Provides an introduction to the concepts of environmental engineering including air pollution, water pollution, water treatment, waste management, and health risk assessment. Examines sustainability and global climate change in the context of contemporary environmental engineering.
Lecture 3 hours. Total 3 hours per week.
Prerequisite: CHM 111
3 credits
EGR 280 Detailed Outline icon
EGR 282 - Hydraulics for Civil and Environmental Engineering
Introduces the basic principles governing the statics and dynamics of fluids, especially incompressible fluids. Examines hydrostatic pressure; continuity, Bernoulli, and momentum equations; viscosity flow problems; measuring instruments; and applications to closed conduits and open channels.
Lecture 3 hours. Total 3 hours per week.
Prerequisite: EGR 240 or departmental approval
3 credits
EGR 282 Detailed Outline icon
EGR 285 - Capstone Project
Provides a capstone research project for the final semester of the program, focusing inquiry upon an area of interest to the student or area relevant to their prospective career field. May include problem based research topics, internships, or other focused projects.
Lecture 1 hour per week.
Prerequisite: IND 290.
1 credits
EGR 290 - Coordinated Internship
Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.
Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 293 - Studies In
Covers new content not covered in existing courses in the discipline. Allows instructor to explore content and instructional methods to assess the course's viability as a permanent offering.
Variable hours per week.
1-5 credits
EGR 295 - Topics In
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
EGR 296 - On-Site Training
Specializes in career orientation and training program without pay in selected businesses and industry, supervised and coordinated by the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
EGR 297 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-6 credits
EGR 298 - Seminar and Project
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
EGR 299 - Supervised Study
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits